A room with a defined concentration of particles in the air that is introduced into the room or designed, and it is used to generate and deposit as few particles as possible in the place. And other cleaning-related Parameters, Temperature, humidity, pressure, etc. can be controlled as required.
For this purpose, clean room staff must also comply with defined rules of conduct that dictate protective clothing.
Clean Room Particle Count can cover areas of various sizes. Cleanroom Recovery Test The right solution always depends on your pollution control requirements.
Principles of relevant flows in a cleanroom
- Turbulent Diluted Flow:"Non-unidirectional airflow. The principle of this flow is that the action of personnel, depending on the condition of the cleanroom, is to clean the required class of particles in the air.
- Low turbulent displacement flow:One-way airflow, uniform airflow with uniform velocity across the cross-section of a cleanroom or clean area. This is also called "laminar flow" and requires low turbulence inflow. This procedure allows air to leak from the other side. It is usually formed by a double perforated floor. From there, it returns to the recirculation device, where it is filtered again.
The basic structure of the clean room
Each cleanroom environment has different installation requirements and requirements. Depending on them, the solution can include solid wall elements or aluminum curtains and equipment and comes in different sizes. Horizontal Flow Hood is also used in this.
Hard wall for clean room
Soft wall booth construction: PVC curtains protect the local clean air area from environmental influences. Various fan filter modules ensure a "clean" air supply. Exhaust easily escapes from the cleanroom under the curtain.
Individual planning and installation
Easily integrate work surfaces, shelves, wet workstations, individually closed inspection workstations, and airlocks for people and supplies
Possibility of adaptation to expansion of production area
Easy to install additional fan filter module
Rigid Wall Booth Structure: Rigid Wall Booth allows you to quickly create a clean environment for a particular process. Standardized segments make it easy to configure different car sizes.
Advantages of hardware cabins:
- Available in all purity classes
- Suitable for use in production areas with very severe climate tolerance
- Accurate possible inspection of the product or production process
Benefits of a modular cleanroom system:
Individual planning and installation
- Easily integrate work surfaces, shelves, wet workstations, individually closed inspection workstations, and airlocks for people and supplies
- Possibility of adaptation to expansion of production area
- Easy to install additional fan filter module
Benefits of a clean work area:
- The modular clean room principle can be transferred to the workbench, individual booth, mini environment
- Individual modules can be easily connected and meet customer requirements
- Systematic use of available space
- Cleanliness class improves even outside the work surface
Clean room technology as a whole has been very well developed in the economic field. There must be an appropriate ratio of quality to cost. A comparison shows that a standard clean room is not always necessary.
The modular clean room system is a particularly suitable solution for small and medium-sized businesses because it guarantees a high degree of flexibility and the ability to change production areas. The transition between modular clean room systems and clean work areas is seamless.
Comments