It’s not always necessary to replace your window shutters for a new look. If it’s in good shape, then you can repaint the plantation shutter in Jensen Beach. It’s a simple process as long as you have the necessary tools and materials for the project. You can find most of these online or at a hardware store.
Remove Shutters
Unscrew the hinges to remove the shutters from the window frame. Take someone’s help to hold the panels while you unscrew the hinges because the panels can be heavy. Then take out the window frame. You may need to unscrew it or take out nails with a hammer and pry bar.
Mark every shutter with a number to know which part goes where. The shutters may look identical but may differ at smaller levels. Marking them will avoid a mixup.
Remove All Hardware
Painting around knobs, hinges and hooks can be difficult for even the steadiest of hands. They might also get in the way of sanding and priming. It’s more convenient to remove the hardware and reinstall it after you’re done. While taking out each piece, make note of which part goes where to avoid any confusion.
Clean Panels
The shutters need a thorough cleaning before painting. Otherwise, the finish won’t go on evenly or stick to the surface well. Use a feather duster or dry cloth to remove the dirt on the panels. You can also use a vacuum cleaner with appropriate settings. Wipe any remaining grime off with a damp cloth.
Sand Old Paint
Sanding off the old paint will make it easier to recolor your panels. Use fine-grit sandpaper to remove the old paint and create a good surface for the paint to stick to. Clean the sawdust once you’re done.
You can also use a liquid sander for this purpose. It can help you get into nooks and crannies that sandpaper can’t and is easier to use. Follow the manufacturer’s instructions for proper sanding. Make sure that the chemical is suitable for the shutter material.
Hang Panels
It’s hard to get all the sides when you paint the panels by laying them on a flat surface. Suspend the panels with the help of eye-hooks and strings. Make sure that they can swing freely so that you can paint both sides at the same time. They should be away from strong winds and direct sunlight for the best results.
Cover Floor And Walls
Cover the ground and nearby walls with a plastic sheet to prevent paint from falling on them. Use tape to stick the sheets firmly. Remove all furniture and items from the area or cover them as well.
Prime Shutters
Wood shutters usually need priming so that the paint sticks to the surface well. Put a coat of oil-based primer and wait for it to dry. If they’re made out of vinyl, you may not need a primer. But if you want to, you can use a water-based primer and wait for it to dry.
Start Painting
It’s easier to paint using a sprayer than a brush. Spray paint can get into nooks and crannies that would be difficult for a paintbrush. It also helps you resist the urge to apply too many coats.
Choose colors that suit your interior for the perfect window treatment in Palm City. Make sure that they are of high quality and suitable for the environment your shutters will be exposed to.
If you haven’t painted with spray before, practice it on an unused wood block. Apply two coats of paint in light and even layers. Allow it to dry between each application. Adjust the tricky parts like stiles and louvers to paint them.
Reinstall
Once the paint is dry, begin reinstalling the shutters to the window. Install all the hinges, knobs and handles in their correct place. If you need to replace something, get it done. Install the plantation shutters to the right window frames.
Comments